Your browser does not support JavaScript!
長庚大學 綠色科技研究中心
分類清單
郭修伯

郭修伯

教授

電話

#5488(office) #5491(Lab)

Email

sykuo@mail.cgu.edu.tw

實驗室

綠色科技中心固態照明實驗室

(工學院10樓)

學歷

  • 英國伯明罕大學 化工博士 1998-2001
    國立臺灣大學 化工學士 1991-1995

經歷

  • 長庚大學化工與材料工程系(所)教授2012-
    Kyushu University, Japan  Visiting Professor 2012 summer
    Advanced Powder Technology (SCI Journal) Editor 2009-
    長庚大學化工與材料工程系(所)副教授 2007-2012
    長庚大學技術合作處創新育成中心 主任 2005-2010
    長庚大學化工與材料工程系(所)助理教授 2002-2007
    國立臺灣大學化工系 博士後研究員 2002-2002

開授課程

計算機程式
反應工程
粉粒體工程
高等輸送現象(1)
高等輸送現象(2)

專長與研究領域

  • 粉體特徵分析

    多相流系統

    流體化床之能源與環工應用

    混合、造粒等製藥工程與一般粉粒體技術

    塗佈型電池

榮譽

1.      The best-contributed editor in 2010, 2011, 2012 and 2013 for SCI Journal Advanced Powder Technology (IF= 1.650, The Society of Powder Technology, Japan)

2.      International Organizing Committee, 5th and 6th Asian Particle Technology Symposium

3.      Local Organizing Committee, 3rd Asian Conference on Innovative Energy and Environmental Chemical Engineering (ASCON-IEEChE 2012), 11-14 Nov., 2012, Taiwan

4.      Symposium Chair, 2013 Taiwan-Japan Joint Symposium on Mixing Technology, 4-5 March 2013, Taipei, Taiwan

5.      Scientific Committee, PARTEC 2013, 23-25th April 2013, Nuremberg, Germany

6.      Guest lecturer, Summer Seminar on Mixing in Japan, 26-27 August, 2013, Tokyo, Japan (Japanese-side funding)

7.      Guest lecturer, 22th Nisshin Engineering Particle Technology International Seminar (NEPTIS-22), 24 February, 2014, Tokyo, Japan. (Japanese-side funding)

8.      Editorial board member, Geosystem Engineering (publication of the Korean Society for Geosystem Engineering, indexed in Scopus, Geobase and EI Compendex)

9.      Seminar Organizer, 2014 Taiwan-Japan Joint Symposium on Particle Technology, 22 September, 2014, CGU, Taiwan

著作列表

1.      C.Y. Cheng, A.N. Huang and H.P. Kuo*, 2014, “Preparation of the diffuser films using a 1700 mm wide reverse mode gravure coating system”, Journal of Chemical Engineering of Japan, in press.

2.      H.P. Kuo*, C.F. Yang, A.N. Huang, C.T. Wu and W.C Pan, 2014, "“Preparation of the working electrode of dye-sensitized solar cells: effects of screen printing parameters", Journal of the Taiwan Institute of Chemical Engineers, 45, pp. 2340-2345.

3.      A.N. Huang and H.P. Kuo*, 2014, "Developments in the tools for the investigation of mixing in particulate systems - a review", Advanced Powder Technology, 25, pp. 163-173.

4.      H.P. Kuo*, H.Y. Tseng, A.N. Huang and R.C. Hsu, 2014, "A study of the ash production behavior of spent limestone powders in CFBC", Advanced Powder Technology, 25, pp. 472-475.

5.      H.P. Kuo*, C.T. Wu, 2014, "Speed up dye-sensitized solar cell fabrication by rapid dye solution droplets bombardment", Solar Energy Materials and Solar Cells, 120(A), pp. 81-86.

6.      C.Y. Cheng, Y.N. Yang, A.N. Huang and H.P. Kuo*, 2013, "Steam hydration of CFBC bottom ashes in a rotary kiln", Journal of the Taiwan Institute of Chemical Engineers, 44(6), pp.1060-1066.

7.      H. Yang, S. Kudo, H.P. Kuo, K. Norinaga, A. Mori, O. Masek, J. Hayashi*, 2013, "Estimation of enthalpy of bio-oil vapor and heat required for pyrolysis of biomass", Energy & Fuels, 27(5), pp. 2675-2686.

8.      A.N. Huang, L.C. Liu, and H.P. Kuo*, 2013, "The role of end wall shearing in the drum segregation band formation", Powder Technology, 239, pp. 98-104.

9.      A.N. Huang, W.C. Kao and H.P. Kuo*, 2013, "Numerical studies of particle segregation in a rotating drum based on Eulerian continuum approach", Advanced Powder Technology, 24(1), pp. 364-372.

10.  C.T. Wu, H.P. Kuo*, H.A. Tsai, W.C. Pan, 2012, "Rapid dye-sensitized solar cell working electrode preparation using far infrared rapid thermal annealing", Applied Energy, 100, pp. 138-143.

11.  A.N. Huang and H.P. Kuo*, 2012, "A study of the three-dimensional particle size segregation structure in a rotating drum", AIChE Journal, 58(4), pp. 225-229.

12.  A.N. Huang and H.P. Kuo*, 2011, "A study on the transition between neighbouring drum segregated bands and its application to functionally graded material production", Powder Technology, 212(3), pp. 348-353.

13.  H.P. Kuo*, S.M. Pan, and H.T. Hsu, 2011, “Comparisons of the hydrogen-rich syngas compositions from wet rice husk slurry steam reforming reactions using different catalysts”, Biomass & Bioenegy, 35(7), pp. 3025-3031.

14.  H.P. Kuo*, C.T. Wu and R.C. Hsu, 2011, “Continuous toluene vapour photocatalytic deduction in a multi-stage fluidised bed”, Powder Technology, 210(3), pp. 225-229.

15.  H.P. Kuo* and C.H. Cheng, 2010, “The comparison of the elastic properties of the particle assembly in a vibrator determined by the top cap method, the apparent mass method and the energy dissipation method”, Journal of the Taiwan Institute of Chemical Engineers, 41(2), pp. 239-243.

16.  H.P. Kuo*, C.T. Wu and R.C. Hsu, 2009, "Continuous reduction of toluene vapours from the contaminated gas stream in a fluidised bed photoreactor", Powder Technology, 195(1), pp. 50-56.

17.  H.P. Kuo*, M.Y. Chung, and C.C. Lin, 2009, "Design correlations for the optical performance of the particle-diffusing bottom diffusers in the LCD backlight unit", Powder Technology, 192(1), pp.116-121.

18.  H.P. Kuo*, H.Z. Zhang, and R.C. Hsu, 2008, "CFD modelling of a countercurrent staged fluidised bed ", Chemical Engineering Journal, 137(3), pp.664-676.

19.  H.P. Kuo* and Y.W. Chen, 2008, "The determination of the state transition of the granular materials in a vibrating bed using a novel optical signal analysing method", Advanced Powder Technology, 19(1), pp. 61-71.

20.  H.P. Kuo* and M.L. Ku, 2008, "On the plate design in a countercurrent single-stage fluidized bed system ", Advanced Powder Technology, 19(1), pp. 13-24.

21.  H.P. Kuo* and C. Y. Cheng, 2006, "Investigation of the bed types and particle residence time in a staged fluidised bed ", Powder Technology, 169, pp.1-9.

22.  H.P. Kuo*, Y.C. Hsiao and P.Y. Shih, 2006, "A study of the axial segregation in a rotating drum using deformable particles", Powder Technology. 166, pp.161-166.

23.  H.P. Kuo*, P.Y. Shih, and R.C. Hsu, 2006, "Coupled axial-radial segregation in rotating drums with high fill levels", AIChE Journal., 52(7), pp. 2422-2427.

24.  H.P. Kuo*, R.C. Hsu, and Y. C. Hsiao, 2005, "Investigation of Axial Segregation in a Rotating Drum", Powder Technology, 153, pp.196-203.

25.  H.P. Kuo*, P.C. Knight, D. J. Parker, and J.P.K. Seville, 2005, "Solids Circulation and Axial Dispersion of Cohesionless Particles in a V-Mixer", Powder Technology, 152, pp.133-140.

26.  H.P. Kuo, P.C. Knight, D.J. Parker, M.J. Adams and J.P.K. Seville*, 2004, "Discrete Element Simulations of a High Shear Mixer", Advanced Powder Technology, 15(3), pp.297-309.

27.  H.P. Kuo, A.S. Burbidge, P.C. Knight, D.J. Parker, M.J. Adams, and J.P.K. Seville*, 2003, "Non-Equilibrium Particle Motion in the Vicinity of a Single Blade", Powder Technology, 132, pp. 1-9.

28.  S.P. Ju, W. M. Lu*H.P. Kuo, F.S. Chu and Y. C. Lu, 2003, "The Formation of a Suspension Bed on Dual Flow Distributors", Powder Technology, 131, pp.139-155.

29.  H.P. Kuo, P.C. Knight, D.J. Parker, Y. Tsuji, M.J. Adams, and J.P.K. Seville*, 2002,  "The Influence of DEM Simulation Parameters on the Particle Behaviour in a V-mixer", Chemical Engineering Science, 57, pp. 3621 - 3638.

30.  H.P. Kuo, Y.S. Fangary, D.J. Parker, M. Barigou, and J.P.K. Seville*, 2001, "Validation of Numerical Simulations of Mixing Using PEPT Experiments", Chemie Ingenieur Technik, 73(6), pp.642 - 642.

 

 

瀏覽數  
  • 友善列印
  • 新增到收藏夾
將此文章推薦給親友
請輸入此驗證碼
Voice Play
更換驗證碼